Yu1709$!%yuyu!$%wutu!5=126+

                
____  ___       .__                 
\   \/  /  _____|  |   ______  _  __
 \     /  /  ___/  |  /  _ \ \/ \/ /
 /     \  \___ \|  |_(  <_> )     / 
/___/\  \/____  >____/\____/ \/\_/  
      \_/     \/    @ligmakokz

Editing: functions

# -*-Shell-script-*-
#
# functions This file contains functions to be used by most or all
#       shell scripts in the /etc/init.d directory.
#

TEXTDOMAIN=initscripts

# Make sure umask is sane
umask 022

# Set up a default search path.
PATH="/sbin:/usr/sbin:/bin:/usr/bin"
export PATH

if [ $PPID -ne 1 -a -z "$SYSTEMCTL_SKIP_REDIRECT" ] && \
        [ -d /run/systemd/system ] ; then
    case "$0" in
    /etc/init.d/*|/etc/rc.d/init.d/*)
        _use_systemctl=1
        ;;
    esac
fi

systemctl_redirect () {
    local s
    local prog=${1##*/}
    local command=$2
    local options=""

case "$command" in
    start)
        s=$"Starting $prog (via systemctl): "
        ;;
    stop)
        s=$"Stopping $prog (via systemctl): "
        ;;
    reload|try-reload)
        s=$"Reloading $prog configuration (via systemctl): "
        ;;
    restart|try-restart|condrestart)
        s=$"Restarting $prog (via systemctl): "
        ;;
    esac

if [ -n "$SYSTEMCTL_IGNORE_DEPENDENCIES" ] ; then
        options="--ignore-dependencies"
    fi

if ! systemctl show "$prog.service" > /dev/null 2>&1 || \
            systemctl show -p LoadState "$prog.service" | grep -q 'not-found' ; then
        action $"Reloading systemd: " /bin/systemctl daemon-reload
    fi

action "$s" /bin/systemctl $options $command "$prog.service"
}

# Get a sane screen width
[ -z "${COLUMNS:-}" ] && COLUMNS=80

# Read in our configuration
if [ -z "${BOOTUP:-}" ]; then
    if [ -f /etc/sysconfig/init ]; then
        . /etc/sysconfig/init
    else
        # verbose ->> very (very!) old bootup look (prior to RHL-6.0?)
        # color ->> default bootup look
        # other ->> default bootup look without ANSI colors or positioning
        BOOTUP=color
        # Column to start "[  OK  ]" label in:
        RES_COL=60
        # terminal sequence to move to that column:
        MOVE_TO_COL="echo -en \\033[${RES_COL}G"
        # Terminal sequence to set color to a 'success' (bright green):
        SETCOLOR_SUCCESS="echo -en \\033[1;32m"
        # Terminal sequence to set color to a 'failure' (bright red):
        SETCOLOR_FAILURE="echo -en \\033[1;31m"
        # Terminal sequence to set color to a 'warning' (bright yellow):
        SETCOLOR_WARNING="echo -en \\033[1;33m"
        # Terminal sequence to reset to the default color:
        SETCOLOR_NORMAL="echo -en \\033[0;39m"

# Verbosity of logging:
        LOGLEVEL=1
    fi

# NOTE: /dev/ttyS* is serial console. "not a tty" is such as
    # /dev/null associated when executed under systemd service units.
    if LANG=C tty | grep --quiet -e '$/dev/ttyS\|not a tty$'; then
        BOOTUP=serial
        MOVE_TO_COL=
        SETCOLOR_SUCCESS=
        SETCOLOR_FAILURE=
        SETCOLOR_WARNING=
        SETCOLOR_NORMAL=
    fi
fi

# Check if any of $pid (could be plural) are running
checkpid() {
    local i

for i in $* ; do
        [ -d "/proc/$i" ] && return 0
    done
    return 1
}

__kill_pids_term_kill_checkpids() {
    local base_stime=$1
    shift 1
    local pid=
    local pids=$*
    local remaining=
    local stat=
    local stime=

for pid in $pids ; do
        [ ! -e  "/proc/$pid" ] && continue
        read -r line < "/proc/$pid/stat" 2> /dev/null

stat=($line)
        stime=${stat[21]}

[ -n "$stime" ] && [ "$base_stime" -lt "$stime" ] && continue
        remaining+="$pid "
    done

echo "$remaining"
    [ -n "$remaining" ] && return 1

return 0
}

__kill_pids_term_kill() {
    local try=0
    local delay=3;
    local pid=
    local stat=
    local base_stime=

# We can't initialize stat & base_stime on the same line where 'local'
    # keyword is, otherwise the sourcing of this file will fail for ksh...
    stat=($(< /proc/self/stat))
    base_stime=${stat[21]}

if [ "$1" = "-d" ]; then
        delay=$2
        shift 2
    fi

local kill_list=$*

kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)

[ -z "$kill_list" ] && return 0

kill -TERM $kill_list >/dev/null 2>&1
    sleep 0.1

kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
    if [ -n "$kill_list" ] ; then
        while [ $try -lt $delay ] ; do
            sleep 1
            kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
            [ -z "$kill_list" ] && break
            let try+=1
        done
        if [ -n "$kill_list" ] ; then
            kill -KILL $kill_list >/dev/null 2>&1
            sleep 0.1
            kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
        fi
    fi

[ -n "$kill_list" ] && return 1
    return 0
}

# __proc_pids {program} [pidfile]
# Set $pid to pids from /run* for {program}.  $pid should be declared
# local in the caller.
# Returns LSB exit code for the 'status' action.
__pids_var_run() {
    local base=${1##*/}
    local pid_file=${2:-/run/$base.pid}
    local pid_dir=$(/usr/bin/dirname $pid_file > /dev/null)
    local binary=$3

[ -d "$pid_dir" ] && [ ! -r "$pid_dir" ] && return 4

pid=
    if [ -f "$pid_file" ] ; then
            local line p

[ ! -r "$pid_file" ] && return 4 # "user had insufficient privilege"
        while : ; do
            read line
            [ -z "$line" ] && break
            for p in $line ; do
                if [ -z "${p//[0-9]/}" ] && [ -d "/proc/$p" ] ; then
                    if [ -n "$binary" ] ; then
                        local b=$(readlink /proc/$p/exe | sed -e 's/\s*(deleted)$//')
                        [ "$b" != "$binary" ] && continue
                    fi
                    pid="$pid $p"
                fi
            done
        done < "$pid_file"

if [ -n "$pid" ]; then
                    return 0
            fi
        return 1 # "Program is dead and /run pid file exists"
    fi
    return 3 # "Program is not running"
}

# Output PIDs of matching processes, found using pidof
__pids_pidof() {
    pidof -c -o $$ -o $PPID -o %PPID -x "$1" || \
        pidof -c -o $$ -o $PPID -o %PPID -x "${1##*/}"
}

# A function to start a program.
daemon() {
    # Test syntax.
    local gotbase= force= nicelevel corelimit
    local pid base= user= nice= bg= pid_file=
    local cgroup=
    nicelevel=0
    while [ "$1" != "${1##[-+]}" ]; do
        case $1 in
        '')
            echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
            return 1
            ;;
        --check)
            base=$2
            gotbase="yes"
            shift 2
            ;;
        --check=?*)
            base=${1#--check=}
            gotbase="yes"
            shift
            ;;
        --user)
            user=$2
            shift 2
            ;;
        --user=?*)
            user=${1#--user=}
            shift
            ;;
        --pidfile)
            pid_file=$2
            shift 2
            ;;
        --pidfile=?*)
            pid_file=${1#--pidfile=}
            shift
            ;;
        --force)
            force="force"
            shift
            ;;
        [-+][0-9]*)
            nice="nice -n $1"
            shift
            ;;
        *)
            echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
            return 1
            ;;
      esac
    done

# Save basename.
    [ -z "$gotbase" ] && base=${1##*/}

# See if it's already running. Look *only* at the pid file.
    __pids_var_run "$base" "$pid_file"

[ -n "$pid" -a -z "$force" ] && return

# make sure it doesn't core dump anywhere unless requested
    corelimit="ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0}"

# if they set NICELEVEL in /etc/sysconfig/foo, honor it
    [ -n "${NICELEVEL:-}" ] && nice="nice -n $NICELEVEL"

# if they set CGROUP_DAEMON in /etc/sysconfig/foo, honor it
    if [ -n "${CGROUP_DAEMON}" ]; then
        if [ ! -x /bin/cgexec ]; then
            echo -n "Cgroups not installed"; warning
            echo
        else
            cgroup="/bin/cgexec";
            for i in $CGROUP_DAEMON; do
                cgroup="$cgroup -g $i";
            done
        fi
    fi

# Echo daemon
    [ "${BOOTUP:-}" = "verbose" -a -z "${LSB:-}" ] && echo -n " $base"

# And start it up.
    if [ -z "$user" ]; then
       $cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $*"
    else
       $cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $*"
    fi

[ "$?" -eq 0 ] && success $"$base startup" || failure $"$base startup"
}

# A function to stop a program.
killproc() {
    local RC killlevel= base pid pid_file= delay try binary=

RC=0; delay=3; try=0
    # Test syntax.
    if [ "$#" -eq 0 ]; then
        echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
        return 1
    fi
    if [ "$1" = "-p" ]; then
        pid_file=$2
        shift 2
    fi
    if [ "$1" = "-b" ]; then
        if [ -z $pid_file ]; then
            echo $"-b option can be used only with -p"
            echo $"Usage: killproc -p pidfile -b binary program"
            return 1
        fi
        binary=$2
        shift 2
    fi
    if [ "$1" = "-d" ]; then
        delay=$(echo $2 | awk -v RS=' ' -v IGNORECASE=1 '{if($1!~/^[0-9.]+[smhd]?$/) exit 1;d=$1~/s$|^[0-9.]*$/?1:$1~/m$/?60:$1~/h$/?60*60:$1~/d$/?24*60*60:-1;if(d==-1) exit 1;delay+=d*$1} END {printf("%d",delay+0.5)}')
        if [ "$?" -eq 1 ]; then
            echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
            return 1
        fi
        shift 2
    fi

# check for second arg to be kill level
    [ -n "${2:-}" ] && killlevel=$2

# Save basename.
    base=${1##*/}

# Find pid.
    __pids_var_run "$1" "$pid_file" "$binary"
    RC=$?
    if [ -z "$pid" ]; then
        if [ -z "$pid_file" ]; then
            pid="$(__pids_pidof "$1")"
        else
            [ "$RC" = "4" ] && { failure $"$base shutdown" ; return $RC ;}
        fi
    fi

# Kill it.
    if [ -n "$pid" ] ; then
        [ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base "
        if [ -z "$killlevel" ] ; then
            __kill_pids_term_kill -d $delay $pid
            RC=$?
            [ "$RC" -eq 0 ] && success $"$base shutdown" || failure $"$base shutdown"
        # use specified level only
        else
            if checkpid $pid; then
                kill $killlevel $pid >/dev/null 2>&1
                RC=$?
                [ "$RC" -eq 0 ] && success $"$base $killlevel" || failure $"$base $killlevel"
            elif [ -n "${LSB:-}" ]; then
                RC=7 # Program is not running
            fi
        fi
    else
        if [ -n "${LSB:-}" -a -n "$killlevel" ]; then
            RC=7 # Program is not running
        else
            failure $"$base shutdown"
            RC=0
        fi
    fi

# Remove pid file if any.
    if [ -z "$killlevel" ]; then
        rm -f "${pid_file:-/run/$base.pid}"
    fi
    return $RC
}

# A function to find the pid of a program. Looks *only* at the pidfile
pidfileofproc() {
    local pid

# Test syntax.
    if [ "$#" = 0 ] ; then
        echo $"Usage: pidfileofproc {program}"
        return 1
    fi

__pids_var_run "$1"
    [ -n "$pid" ] && echo $pid
    return 0
}

# A function to find the pid of a program.
pidofproc() {
    local RC pid pid_file=

# Test syntax.
    if [ "$#" = 0 ]; then
        echo $"Usage: pidofproc [-p pidfile] {program}"
        return 1
    fi
    if [ "$1" = "-p" ]; then
        pid_file=$2
        shift 2
    fi
    fail_code=3 # "Program is not running"

# First try "/run/*.pid" files
    __pids_var_run "$1" "$pid_file"
    RC=$?
    if [ -n "$pid" ]; then
        echo $pid
        return 0
    fi

[ -n "$pid_file" ] && return $RC
    __pids_pidof "$1" || return $RC
}

status() {
    local base pid lock_file= pid_file= binary=

# Test syntax.
    if [ "$#" = 0 ] ; then
        echo $"Usage: status [-p pidfile] {program}"
        return 1
    fi
    if [ "$1" = "-p" ]; then
        pid_file=$2
        shift 2
    fi
    if [ "$1" = "-l" ]; then
        lock_file=$2
        shift 2
    fi
    if [ "$1" = "-b" ]; then
        if [ -z $pid_file ]; then
            echo $"-b option can be used only with -p"
            echo $"Usage: status -p pidfile -b binary program"
            return 1
        fi
        binary=$2
        shift 2
    fi
    base=${1##*/}

if [ "$_use_systemctl" = "1" ]; then
        systemctl status ${0##*/}.service
        ret=$?
        # LSB daemons that dies abnormally in systemd looks alive in systemd's eyes due to RemainAfterExit=yes
        # lets adjust the reality a little bit
        if systemctl show -p ActiveState ${0##*/}.service | grep -q '=active$' && \
        systemctl show -p SubState ${0##*/}.service | grep -q '=exited$' ; then
            ret=3
        fi
        return $ret
    fi

# First try "pidof"
    __pids_var_run "$1" "$pid_file" "$binary"
    RC=$?
    if [ -z "$pid_file" -a -z "$pid" ]; then
        pid="$(__pids_pidof "$1")"
    fi
    if [ -n "$pid" ]; then
        echo $"${base} (pid $pid) is running..."
        return 0
    fi

case "$RC" in
    0)
        echo $"${base} (pid $pid) is running..."
        return 0
        ;;
    1)
        echo $"${base} dead but pid file exists"
        return 1
        ;;
    4)
        echo $"${base} status unknown due to insufficient privileges."
        return 4
        ;;
    esac
    if [ -z "${lock_file}" ]; then
        lock_file=${base}
    fi
    # See if /var/lock/subsys/${lock_file} exists
    if [ -f /var/lock/subsys/${lock_file} ]; then
        echo $"${base} dead but subsys locked"
        return 2
    fi
    echo $"${base} is stopped"
    return 3
}

echo_success() {
    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
    echo -n "["
    [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
    echo -n $"  OK  "
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "]"
    echo -ne "\r"
    return 0
}

echo_failure() {
    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
    echo -n "["
    [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
    echo -n $"FAILED"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "]"
    echo -ne "\r"
    return 1
}

echo_passed() {
    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
    echo -n "["
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo -n $"PASSED"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "]"
    echo -ne "\r"
    return 1
}

echo_warning() {
    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
    echo -n "["
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo -n $"WARNING"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "]"
    echo -ne "\r"
    return 1
}

# Inform the graphical boot of our current state
update_boot_stage() {
    if [ -x /bin/plymouth ]; then
        /bin/plymouth --update="$1"
    fi
    return 0
}

# Log that something succeeded
success() {
    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success
    return 0
}

# Log that something failed
failure() {
    local rc=$?
    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure
    [ -x /bin/plymouth ] && /bin/plymouth --details
    return $rc
}

# Log that something passed, but may have had errors. Useful for fsck
passed() {
    local rc=$?
    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed
    return $rc
}

# Log a warning
warning() {
    local rc=$?
    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning
    return $rc
}

# Run some action. Log its output.
action() {
    local STRING rc

STRING=$1
    echo -n "$STRING "
    shift
    "$@" && success $"$STRING" || failure $"$STRING"
    rc=$?
    echo
    return $rc
}

# returns OK if $1 contains $2
strstr() {
    [ "${1#*$2*}" = "$1" ] && return 1
    return 0
}

# Check whether file $1 is a backup or rpm-generated file and should be ignored
is_ignored_file() {
    case "$1" in
    *~ | *.bak | *.old | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
        return 0
        ;;
    esac
    return 1
}

# Convert the value ${1} of time unit ${2}-seconds into seconds:
convert2sec() {
  local retval=""

case "${2}" in
    deci)   retval=$(awk "BEGIN {printf \"%.1f\", ${1} / 10}") ;;
    centi)  retval=$(awk "BEGIN {printf \"%.2f\", ${1} / 100}") ;;
    mili)   retval=$(awk "BEGIN {printf \"%.3f\", ${1} / 1000}") ;;
    micro)  retval=$(awk "BEGIN {printf \"%.6f\", ${1} / 1000000}") ;;
    nano)   retval=$(awk "BEGIN {printf \"%.9f\", ${1} / 1000000000}") ;;
    piko)   retval=$(awk "BEGIN {printf \"%.12f\", ${1} / 1000000000000}") ;;
  esac

echo "${retval}"
}

# Evaluate shvar-style booleans
is_true() {
    case "$1" in
    [tT] | [yY] | [yY][eE][sS] | [oO][nN] | [tT][rR][uU][eE] | 1)
        return 0
        ;;
    esac
    return 1
}

# Evaluate shvar-style booleans
is_false() {
    case "$1" in
    [fF] | [nN] | [nN][oO] | [oO][fF][fF] | [fF][aA][lL][sS][eE] | 0)
        return 0
        ;;
    esac
    return 1
}

# Apply sysctl settings, including files in /etc/sysctl.d
apply_sysctl() {
    if [ -x /lib/systemd/systemd-sysctl ]; then
    /lib/systemd/systemd-sysctl
    else
        for file in /usr/lib/sysctl.d/*.conf ; do
            is_ignored_file "$file" && continue
            [ -f /run/sysctl.d/${file##*/} ] && continue
            [ -f /etc/sysctl.d/${file##*/} ] && continue
            test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
        done
        for file in /run/sysctl.d/*.conf ; do
            is_ignored_file "$file" && continue
            [ -f /etc/sysctl.d/${file##*/} ] && continue
            test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
        done
        for file in /etc/sysctl.d/*.conf ; do
            is_ignored_file "$file" && continue
            test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
        done
        sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
    fi
}

if [ "$_use_systemctl" = "1" ]; then
        if  [ "x$1" = xstart -o \
              "x$1" = xstop -o \
              "x$1" = xrestart -o \
              "x$1" = xreload -o \
              "x$1" = xtry-restart -o \
              "x$1" = xforce-reload -o \
              "x$1" = xcondrestart ] ; then

systemctl_redirect $0 $1
        exit $?
    fi
fi

strstr "$(cat /proc/cmdline)" "rc.debug" && set -x
return 0

Name	Type	Actions
README	File
functions	File
network	File